Corrugated cardboard, 25″ wide and as tall as you’d like your light
Pendant light cord (this one from Ikea is only $5!)
Step 1: Start by spray painting one side of the cardboard. Let it dry thoroughly and turn the cardboard painted side down.
Step 2: Mark the cardboard at 5-inch intervals lengthwise with the box cutter. On each mark, make a vertical cut with the box cutter so that the top side of the cardboard is cut but the bottom side remains intact.
Step 3: Lay the cardboard flat again and cut it into strips lengthwise by tracing along the yard stick with the box cutter.
Step 4: Once your strips are cut, hot glue the ends of each strip together (painted side in) so that you have pentagons. Then begin making a staggered stack with the pentagons and securing them in place with hot glue.
Step 5: Finally, cut a solid pentagon out of cardboard for the top of the pendant. Cut a hole in the top just wide enough to fit the light socket snugly. Secure this to the top of the pendant with hot glue, and light it up!
Not sure yet where this little guy is going to live in my house, but I have a feeling he’ll brighten the perfect corner. Have fun!